JOB DESCRIPTION
Design Engineer will design and analyze components, sub-assemblies, and final assemblies utilizing Solid Works and IDEAS 3D CAD software. The Design Engineer will specify product and component tests, and engage closely with manufacturing operations. Design efforts will adhere to Ferno design standards and product designs and revisions will meet or exceed FDA and EMS industry standards.Essential Duties and Responsibilities include the following. Other duties may be assigned.
- Develop original and specified concept designs for new and existing products. Work
as a team member on cross-functional Product Development teams from concept to
manufacture.
- Complete assigned tasks in a timely manner to meet scheduled deadlines and/or
required implementation plans.
- Complete or verify the structural and functional analysis for each product, sub-
assembly, or component design.
- Develop models, renderings and technical drawings of each concept design.
- Release detailed drawings and Bill of Materials for approved designs, including first
article approvals as needed.
- Work with manufacturing operations during trial runs and early production builds on
new products and on major changes to existing products.
- Support manufacturing operations on product sustainment and product continuous
improvement projects.
- Maintain project communications with inside and outside stakeholders.
- Exercise safety precautions at all times.
- Maintain accurate records and documentation of design developments during all
phases of each project.
- Assist in material selection for aluminum alloys, ferrous and non-ferrous metals,
plastics, and composites.
- Assist in the development of tooling/fixtures.
- Interact with Product Management regarding product designs, functionality, and
application.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Other computer software knowledge includes Microsoft office products.
- Exposure to manufacturing processes such as sheet metal fabrication, drilling,
machining, and welding is desirable.
- Ability to set-up, constrain, and analyze component-level Finite Element Analyses is
preferred.
- Ability to apply robust engineering practices, and perform analyses via hand
calculations, to design projects.
- Should be knowledgeable of basic design principles for injection molding,
metalworking, machining, castings, and thermo-set materials.
EDUCATION and/or EXPERIENCE:
- Bachelor's degree (BSME) from four-year college or university.
- Minimum three years experience in designing in a 3D environment; kinematic
analysis and FEA abilities preferred.
- Minimum of three years of solids modeling experience. Solid Works 3D experience
preferred, familiarity with IDEAS design software would be an advantage.
- Design experience should include solids modeling, detailing, and assembly.
- Special consideration given to candidates with product packaging (shipping and
handling) experience.
- Materials experience should include ferrous and non-ferrous metals, thermo-
plastics, and thermo-sets.
COMMUNICATION SKILLS:
- Ability to read, analyze, and interpret general business periodicals, professional
journals, financial reports, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of
managers, customers, and the general public.
MATHEMATICAL SKILLS:
- Ability to apply advanced mathematical concepts such as integral calculus,
exponents, logarithms, quadratic equations, and statistical analysis.
- Ability to apply mathematical operations to such tasks as frequency distribution,
determination of test reliability and validity, analysis of variance, correlation
techniques, sampling theory, and factor analysis.
REASONING
- Ability to define problems collect data, establish facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in mathematical or
diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate.
A 45-hour workweek is normal and expected. Work on Saturday will be required periodically.
TRAINING
- Ferno IT/Network familiarization
- ERP Systems MAPICS
- Portal
- Network drives and folders
- Engineering procedures, Work Instructions, and Policies
- Product Design files and archives
- Test files and procedures
- Familiarization with Test Facility
- Familiarization with 3D CAD printer
- Engineering Request procedure
- Ferno Product Portfolio familiarization
- Wilmington HQ organizational structure
- Ferno Group Companies and associated products
- Engineering Design software
- EPDM Design software
- Solidworks 3D CAD
- Ferno CAD standards
Design Engineer - Wilmington, OH
Ferno-Washington, Inc. is one of the world's leading medical technology companies with the most broadly based range of products in patient-handling and emergency medical equipment and mortuary services. Ferno-Washington, Inc. currently has an opening for a design engineer to design and analyze components, sub-assemblies and final assemblies, utilizing Solid Works and IDEAS 3D CAD software. The Design Engineer will specify product and component tests as appropriate for new design and work closely with manufacturing operations during the design and implementation phases of introducing new or revised component parts and assemblies.
ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following:
QUALIFICATIONS & EXPERIENCE
A Bachelor's degree (BSME) from an accredited college or university, with a minimum of 3 years experience utilizing 3D design tools ; kinematic analysis and FEA capabilities preferred. Exposure to manufacturing processes such as sheet metal fabrication, drilling, machining, and welding is desirable.
Materials experience should include ferrous and non-ferrous metals, thermo-plastics, and thermo-sets.
Ability to apply robust engineering practices, and perform analyses via hand calculations, to design projects is expected.
Candidates should be knowledgeable of basic design principles for injection molding, metalworking, machining, castings, and thermo-set materials.
A 45 hour work week is normal and expected.
Work on Saturday will be required periodically.
Interested and qualified candidates should apply online at ferno.com.
Ferno-Washington, Inc. is an Equal Opportunity Employer M/F/D/V.
- Develop original and specified concept designs for new and existing products. Work
as a team member on cross-functional Product Development teams from concept to
manufacture.
- Complete assigned tasks in a timely manner to meet scheduled deadlines and/or
required implementation plans.
- Complete or verify the structural and functional analysis for each product, sub-
assembly, or component design.
- Develop models, renderings and technical drawings of each concept design.
- Release detailed drawings and Bill of Materials for approved designs, including first
article approvals as needed.
- Work with manufacturing operations during trial runs and early production builds on
new products and on major changes to existing products.
- Support manufacturing operations on product sustainment and product continuous
improvement projects.
- Maintain project communications with inside and outside stakeholders.
- Exercise safety precautions at all times.
- Maintain accurate records and documentation of design developments during all
phases of each project.
- Assist in material selection for aluminum alloys, ferrous and non-ferrous metals,
plastics, and composites.
- Assist in the development of tooling/fixtures.
- Interact with Product Management regarding product designs, functionality, and
application.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Other computer software knowledge includes Microsoft office products.
- Exposure to manufacturing processes such as sheet metal fabrication, drilling,
machining, and welding is desirable.
- Ability to set-up, constrain, and analyze component-level Finite Element Analyses is
preferred.
- Ability to apply robust engineering practices, and perform analyses via hand
calculations, to design projects.
- Should be knowledgeable of basic design principles for injection molding,
metalworking, machining, castings, and thermo-set materials.
EDUCATION and/or EXPERIENCE:
- Bachelor's degree (BSME) from four-year college or university.
- Minimum three years experience in designing in a 3D environment; kinematic
analysis and FEA abilities preferred.
- Minimum of three years of solids modeling experience. Solid Works 3D experience
preferred, familiarity with IDEAS design software would be an advantage.
- Design experience should include solids modeling, detailing, and assembly.
- Special consideration given to candidates with product packaging (shipping and
handling) experience.
- Materials experience should include ferrous and non-ferrous metals, thermo-
plastics, and thermo-sets.
COMMUNICATION SKILLS:
- Ability to read, analyze, and interpret general business periodicals, professional
journals, financial reports, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of
managers, customers, and the general public.
MATHEMATICAL SKILLS:
- Ability to apply advanced mathematical concepts such as integral calculus,
exponents, logarithms, quadratic equations, and statistical analysis.
- Ability to apply mathematical operations to such tasks as frequency distribution,
determination of test reliability and validity, analysis of variance, correlation
techniques, sampling theory, and factor analysis.
REASONING
- Ability to define problems collect data, establish facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in mathematical or
diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate.
A 45-hour workweek is normal and expected. Work on Saturday will be required periodically.
TRAINING
- Ferno IT/Network familiarization
- ERP Systems MAPICS
- Portal
- Network drives and folders
- Engineering procedures, Work Instructions, and Policies
- Product Design files and archives
- Test files and procedures
- Familiarization with Test Facility
- Familiarization with 3D CAD printer
- Engineering Request procedure
- Ferno Product Portfolio familiarization
- Wilmington HQ organizational structure
- Ferno Group Companies and associated products
- Engineering Design software
- EPDM Design software
- Solidworks 3D CAD
- Ferno CAD standards
Design Engineer - Wilmington, OH
Ferno-Washington, Inc. is one of the world's leading medical technology companies with the most broadly based range of products in patient-handling and emergency medical equipment and mortuary services. Ferno-Washington, Inc. currently has an opening for a design engineer to design and analyze components, sub-assemblies and final assemblies, utilizing Solid Works and IDEAS 3D CAD software. The Design Engineer will specify product and component tests as appropriate for new design and work closely with manufacturing operations during the design and implementation phases of introducing new or revised component parts and assemblies.
ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following:
- Develop original and specified concept designs for new and existing products.
- Work as a team member on cross-functional Product Development Teams from concept to manufacture.
- Complete assigned tasks meeting scheduled deadlines and/or required implementation plans.
- Complete or verify the structural and functional analysis for each product, sub-assembly, or component design.
- Develop models, renderings and technical drawings of each concept design.
- Release detailed drawings and Bill of Materials for approved designs, including first article approvals as needed.
- Work with manufacturing operations during trial runs and early production builds on new products and on major changes to existing products.
- Support manufacturing operations on product sustainment and product continuous improvement projects.
- Maintain project communications with inside and outside stakeholders.
- Maintain accurate records and documentation of design developments during all phases of each project.
- Assist in material selection for aluminum alloys, ferrous and non-ferrous metals, plastics, and composites.
- Assist in the development of tooling/fixtures.
- Interact with Product Management regarding product designs, functionality, and application.
QUALIFICATIONS & EXPERIENCE
A Bachelor's degree (BSME) from an accredited college or university, with a minimum of 3 years experience utilizing 3D design tools ; kinematic analysis and FEA capabilities preferred. Exposure to manufacturing processes such as sheet metal fabrication, drilling, machining, and welding is desirable.
Materials experience should include ferrous and non-ferrous metals, thermo-plastics, and thermo-sets.
Ability to apply robust engineering practices, and perform analyses via hand calculations, to design projects is expected.
Candidates should be knowledgeable of basic design principles for injection molding, metalworking, machining, castings, and thermo-set materials.
A 45 hour work week is normal and expected.
Work on Saturday will be required periodically.
Interested and qualified candidates should apply online at ferno.com.
Ferno-Washington, Inc. is an Equal Opportunity Employer M/F/D/V.
JOB REQUIREMENTS
JOB SNAPSHOT
Employment TypeFull-Time
Job TypeEngineering
EducationNot Specified
ExperienceNot Specified
Manages OthersNo
RelocationNo
IndustryManufacturing
Required TravelNot Specified
Job ID1322
Posts
0 comments:
Post a Comment